The ultrasonic welding machine transfers the ultrasonic energy to the welding area through the upper welding parts. Because the welding area is large, the resistance of the two welding interfaces is large, so the local high temperature will occur. Moreover, due to poor thermal conductivity of plastics, it can not be distributed in a timely manner. It is gathered in the welding area, resulting in the rapid melting of two plastic contact surfaces, and after a certain pressure, it is integrated into one body. When the ultrasonic stops, the pressure will last for a few seconds to solidify it, so that a strong molecular chain will be formed to achieve the purpose of welding. The strength of welding can be close to the strength of raw materials.
1. ultrasonic welding machine machine gravity steel casting, large base structure, high stability and precision, beautiful appearance.
2 first to create computer LCD touch control, electric motor lifting system, debugging more convenient.
3. careful design of excellent vibration system, fine tuning, cylinder, vibrator, three in one direct drive, so that the fusion play a better performance.
Suitable for ultrasonic welding industry: plastics, electronics, electrical appliances, auto parts, packaging, environmental protection, medical devices, non-woven fabrics, toys, communications equipment and other industries.
Advantages of supersonic wave welding machine
1. advantages of ultrasonic plastic welding: fast welding speed, high welding strength and good sealing ability.
Instead of the traditional welding / bonding process, it is cheap, clean, pollution-free and will not damage the workpieces. The welding process is stable. All welding parameters can be tracked and monitored by software system. Once a fault is found, it is easy to eliminate and maintain it.
2. advantages of ultrasonic metal welding:
1) the welding material is not fused, and the properties of the metal are not fragile.
2) good electrical conductivity after welding, very low resistance coefficient or almost zero.
3) low requirements for welding metal surface, oxidation or electroplating can be welded.
4) the welding time is short, without any flux, gas and solder.
5) the welding is free of spark, and the environmental protection is safe.
|下一条:Advantages of intermediate frequency...||上一条:Auxiliary equipment for electric...|